Assembly Instructions

1. Lay a stack of the BLUE-X® plastic film (Part A) on a flat surface at countertop level in a building or sheltered area.

2. Roll Part A lengthwise into a tube about 2 inches in diameter.

3. Slide the rolled Part A into the polytube (Part B). See drawing A.

4. Even up the ends. Part B should extend up to 1/2 inch above Part A on the top.

5. Place assembled Shelters in large plastic bags for transport to field.


The Shelter is now ready to install.

Blux X 07

Installation Instructions

Tape Installation

1 1

Stakes Only Installation

1 1

Plastic Ties Installation

1 1